Set Screw

€ 1,20 Excl. btw (€ 1,20 incl.)

Stainless steel hex socket set screw (G 1/8″ BSP, 10 mm) – the same set screw that comes standard in Linebar couplings. Ideal as spare or replacement when one gets lost. Specifically suitable for Linebar T-, L- and cord couplings – not to be replaced by a metric M10 bolt.

Secure checkout via Stripe
Shipment tracking
Right of withdrawal applies

This stainless steel hex socket set screw 1/8″ (76A) is the original screw found in the Linebar couplings. Useful to keep as a spare, or for when one occasionally disappears on the job site.

Important to note: this is not a metric M10 bolt, but a 1/8″ BSP (G 1/8) gas thread according to ISO 228-1. The thread in the Linebar couplings is also tapped for this standard. If you use a metric fine thread (e.g., M10×1), it may initially seem to ‘catch’, but it will turn stiffly, not fully screw in, and can damage the coupling’s thread.

With this original set screw you are assured of:

the correct fit
smooth operation with hex key
a secure, play-free locking of your Linebar profiles on the stakes

Perfect for those who work professionally with Linebar and don’t want to lose time due to missing or poorly fitting screws.

Product Features

Weight	0,003 kg
Type:	Stainless steel hex socket set screw 1/8" (76A)
Thread:	1/8" BSP (G 1/8), parallel thread according to ISO 228-1
Screw dimension:	1/8" × 10 mm
Pitch	28 threads per inch (pitch ≈ 0.91 mm – finer than M10×1)
Compatible with	Linebar T-coupling, L-coupling and coupling with hook
Tightening method	Hex socket

Tested on site. Approved by professionals.

Linebar is used daily on real construction sites by people who need to work efficiently and accurately. From landscaping to structural work and earthworks, here's what professionals and DIY enthusiasts themselves say about working with Linebar.

“We often lay out terraces, garden walls and outbuildings. With Linebar, we are ready much faster and can easily adjust everything without starting over. This is a huge time saver, especially on smaller sites.”

Tom Vermeulen
Landscaping & outdoor design

“We use Linebar on sites for setting out foundations. The system remains very stable. Our workers quickly asked to purchase several more and no longer use wooden stakes or construction jigs anywhere.”

“Before I start digging, I want to know exactly where everything is. I used to work with rebar, but I had to double-check or move it each time. With Linebar, I work much more precisely and everything remains tight.”

“We mainly use Linebar for timber frame and outbuildings. The corner couplings are great: quickly square and everything can be adjusted so quickly and easily. A very well thought-out system.”

Bart Penders
Joinery & timber frame construction

“Flexibility is important for renovations and expansions. Linebar allows you to quickly move or adjust lines without having to rebuild everything. That just works much faster!”

Sven De Smet
Small building contractor & renovation

“I completely set out my outbuilding myself with Linebar. This really helped me to square it very quickly. It’s also so nice that you can adjust it so simply compared to wooden planks and hammering nails.”